Наш сайт использует cookie-файлы, данные об IP-адресе и вашем местоположении для того, чтобы сделать сайт максимально удобным для Вас. Если Вы продолжите пользоваться нашими услугами, мы будем считать, что Вы согласны с использованием cookie-файлов. Политика конфиденциальности

The equipment of raw materials warehousing with a screw

The equipment of raw materials warehousing with a screw

Device mechanised warehouse of raw material with a screw drive is designed for the reception of raw materials (biomass), its accumulation and batching for processing. The possible types of raw materials: bulk wood waste (wood chips, sawdust, chips), bulk agricultural waste (husk, husks, dehydrated litter and manure, etc.), bulk waste промпереработки (dehydrated alcohol Barda, beer grain, beet pulp), milled peat, sapropel and lignin, etc.

The main element of the equipment of the mechanised warehouse of raw material of this type is a special screw conveyor (spiral conveyor, screw conveyor, screw conveyor). The carrier is attached to the floor of the warehouse with only one hand, and the connection - swivel. Thus, the carrier may move around the point of attachment to the floor, describing a circle.
Auger mounted in such a way that one of his party, devoted to the raw material, - open. The rotation of the screw by means of the actuators (motor-reducer) leads to two kinds of motion: firstly, the raw material is captured by a screw and moves around the body to the point of fastening belt to the floor, secondly, the carrier moves in a circle, «while» the raw materials.


Screw conveyor consists of a case, screw, bearing units and drive. The housing has the shape of a sector of the cylinder. Inside the body of the bearing supports set the input screw (screw). Screw made of solid steel strip rolled into a spiral on the special technology. To protect bearing units from the ingress of particles of the material, shaft screw has a special seals. For even greater reliability of bearing units can be mounted on the hull of a conveyor belt through a spacer sleeves prevent leakage of the transported material inside the bearings. Possible regulation of frequency of rotation of the screw, hence, the productivity of the auger. Capacity of the motor-reducer is chosen depending on the size of the screw, and the characteristics of transported material and performance requirements. Housing screw made of sheet metal and consists of sections. On the whole length of the hull there are ribs and a solid frame, to increase strength and to avoid deformation of the casing. The carrier is made for operation in the lower temperature of ambient air - minus 10 C, the high value - plus 40 degrees.

To advantages of this equipment can be attributed simplicity of design, ease of operation and maintenance, a relatively low price. Lack of ineffective use of the square warehouse (circle), and the low single performance.

Minimum price
14 750 euro
* price without VAT
PARAMETR NAME VALUE
The general dimensions  
Length, m 10,00
Width, m 0,35
Height, m 0,40
Weight  
Weight, kg 600
OUR PORTFOLIO  : The equipment of raw materials warehousing with a screw
Contact number
© 2011 All rights reserved.

Site development :
Slipchenko P.P.
АИР Coffeestudio