Automatic control system of factory on pellets production
Automatic control system of a plant for the production of granules, based on aggregates drying and grinding the series "AS", and solid-fuel thermal generator "Dragon", enables you to control the plant for the production of pellets (and other products) by a single the operator. All parameters of the plant is maintained automatically. Opportunity Manual control directly from the control cabinet, located near the equipment at customer can be saved. Optionally, the system can be equipped with optional touch screen («touch screen»), located on the control cabinet.
The functions of the system include:
1. Automatically maintain the preset parameters of drying of raw materials (final moisture content of raw materials).
2. Automatically maintain the performance area drying depending on the performance of the press granulator ...
3. Automatic stop of the complex in case of a complex emergency.
4. Automatic stop of the complex in a certain sequence on command to the operator.
5. Recording and storage of information (protocols) on the work of complex with with possibility of remotely access to this information.
When you connect to the Internet by the ACS allows to manage the plant remotely.
Important notice:
The fact that the development of our ACS does not mean failure of the normal management of the plant in manual mode. The Plant founded on aggregates the AS, have great advantage over other types of the factories drying equipment. It is much more intense flow of grinding and drying process, resulting in a response rate of the equipment on of action operator a only few seconds. Dry material in the system is always in the minimum number (tens of kilograms, against thousands of pounds - in the dryer drum), - the risks of critical situations reduced to a minimum. For these and other reasons, the human factor is reduced to a sufficient minimum. The proof is made by us a few plants, successfully working around the clock without ACS and with only one operator, on the plot drying and one operator at the plot of pressing. In addition, if the plant capacity to 1.5 t / h, a considerable distance the plant, from industrial centers and the lack of in-house expertise in the operation of process control - equipment of the plant such a system could mean the creation of additional risks, and therefore acquire ACS for such plant we not recommended.
Minimum price
50 000 euro
All production of “SPiKo” – from separate element up to complex ready-to-operate factories (including services of projecting, assembling, testing and start-up) – can be bought on lease.
What are the advantages of lease? It provides the enterprise with additional opportunities of access to modern and efficient technologies, increase in volumes and profitability of production, increase in quality of the production. That is why today lease in one of the most popular financial instrument for creation of new productions and modernization of the existing ones.
Comparing to other methods of buying equipment at the expense of attracted finance leasing possesses several big advantages and only few disadvantages.
Advantages of leasing
1. Opportunity to receive financing in the volume increasing value of a business because mortgaging security in leasing transactions is the object of leasing itself.
2. Buying equipment on lease does not change balance of own and borrowed finance that lets the enterprise receive bank credits at the same time with buying equipment on lease.
3. Buying equipment on lease let the enterprise cut expenses for taxation because:
3.1 Leasing payments in full volume are to be counted together with production prime cost thus they reduce taxable base and as a result reduce tax on profit.
3.2 VAD taken from leasing payments can be reckoned.
3.3 Due to buying equipment on lease its depreciation is considered accelerated thus tax on property is significantly decreased. In case if during the time of leasing contract the equipment is shown at the balance sheet of the Lessor, the Lessee has not to pay tax on property for the property bought in this period in accordance with this contract.
Disadvantages of leasing:
1. Necessity of advanced payment (20 or 30% dependent on the cost of equipment)
2. Necessity (as in our case) to sign trilateral contract that needs much more time to be adopted by all parties than bilateral one.
It is evident that these disadvantages do not overlap the advantages of leasing.
Main terminology:
Leasing (or financial rent) – it is long term rent of equipment with following buying-out (right to buy-out) by the lessee.
Object of leasing – in our case – separate elements or complex factories for producing wood pellets, briquettes, wood flour, granulated meal, wood particles etc.
Leasing contract – is the contract in accordance with which the Lessor (the Buyer) is obliged to buy the equipment specified by the Lessee from special Seller (in this case from “SPiKo, Ltd.”) or our official representative and provide due payment for timely possession of equipment with its following buying-out.
Main types of buying equipment on lease:
1. To present a number of documents for us to be sure in your financial opportunities.
2. To receive adoption of leasing company
3. To sign the leasing contract (and relevant documents if necessary)
4. Lessee has to pay in advance to the Lessor.
5. The Lessor has to pay for the equipment to the Seller.
6. To produce the equipment and transfer it to the Lessee.
7. The Lessee has to make leasing payments in favor of the Lessor.
8. To transfer the equipment to the property of the Lessee.
Main terms of receiving a lease:
1. The Lessee has to posses sufficient volume of profit necessary to supply leasing payments or to have a guarantee of an enterprise satisfying this demand.
2. Equipment bought on lease has to be highly liquid. It can be equipment with good recommendations produced by a trustworthy producer and possessing all necessary certificates. Our equipment satisfies these demands and this let us to sell already 3 factories on lease (including foreign buyers).
3. The Lessor has to be the resident of the same country as the Lessee.
Our assistance in receiving the lease:
1. Recommendations of leasing companies that cooperate actively with our company.
2. Decrease of advance payment received by our company from the leasing company.
3. Providing of services on pre-project preparation of created production and its start-up that decreases the risks both of the Lessor and the Lessee.
* price without VAT
PARAMETR NAME |
VALUE |
The general dimensions |
|
Length, m |
0,75 |
Width, m |
0,50 |
Height, m |
0,10 |
Weight |
|
Weight, kg |
8-10 |
|