Наш сайт использует cookie-файлы, данные об IP-адресе и вашем местоположении для того, чтобы сделать сайт максимально удобным для Вас. Если Вы продолжите пользоваться нашими услугами, мы будем считать, что Вы согласны с использованием cookie-файлов. Политика конфиденциальности

Τηλέφωνο Επικοινωνίας:

Εργοστάσιο παραγωγής βιοκαυσίμων μπρικετών - 1 ... 1,5 t/h

Εργοστάσιο παραγωγής βιοκαυσίμων μπρικετών - 1 ... 1,5 t/h

Factory capacity 1... 1,5 t/hour on production of fuel briquettes from a damp small wood waste (chip, shavings, sawdust), peat, a damp agricultural waste and many other kinds of a biomass.
The raw is brought up by motor transport (or a lift truck) and “the mobile floor” (1) is poured on the mechanized warehouse. Stokers of a mobile floor have a hydraulic drive and under its action make back and forth motions. Shovels ("wings") of stokers have the wedge-shaped form, therefore at movement of stokers the raw with adjustable speed of giving goes to a chain (scraper) transporter (2), further the raw moves on a disk separator (3). On it raw it is separated stones, roots, etc. to impurity which get to the portable container (on the scheme it is not shown), and the raw through gravity flow gets to loading section of the Aggregate of Drying-crushing (4). Products of burning from heat-generator (5) Here move (more in detail) and cold atmospheric air through is emergency-rastopochnuju a pipe (6) (into the given picking doesn't enter) is sucked in. Originally products of burning and cold air mix up, the blending weight is regulated automatically that provides maintenance of the set temperature of the heat-carrier. Then the heat-carrier mixes up with damp raw and is sucked in in the Aggregate of Drying-crushing (4). In it the raw is crushed and then dried up, rising in a heat-carrier flow to the dynamic qualifier which is in head section of the Aggregate of Drying-crushing. The dynamic qualifier, which frequency is set from a control panel (15), drops small and dry raw, and large and damp particles of raw returns to the Aggregate rotor, this process repeats before reception of necessary humidity and degree of crushing of raw (more in detail). The crushed and dried up raw (from this point on it is accepted to name it a flour) is sucked in in a sedimentary cyclone (8) for the account discharged, created induced-draft fan. In a cyclone the flour is besieged at the expense of centrifugal force and moves downwards, and the fulfilled heat-carrier is thrown out in a chimney (16) (into the given picking doesn't enter). From a cyclone the flour through a lock shutter moves in screw or the chain transporter (9), arrives further in the bunker briquettes the press (10). In the bunker there is a device interfering caking of a flour. From the bunker the flour screw a feeder with adjustable speed of giving goes in briquettes a press (11). In a press the flour at first gets to cameras of the preliminary pressing, whence two cup-up directed screw moves in the pressing camera. In the camera of pressing the flour is pressed by the mobile piston (percussion cap) into a conic motionless matrix where under the influence of the big pressure there is a forming of a continuous briquette (further for simplicity – "briquettes"). The briquettes leaving a press, have high temperature and are fragile, therefore they go to a tunnel cooling agent of briquettes (12). In the course of chilling humidity of briquettes decreases at the expense of moisture evaporation, and in them there are physical and chemical changes. As a result they acquire necessary hardness, humidity and temperature. Moving ahead on the tunnel of a cooling agent which in this case is simultaneously and a transporter, the continuous briquette arrives through metallo-detector (13) in an automatic saw (14) where there is its cutting on briquettes of the set length. Further briquettes arrive on a site of packaging and a finished product warehouse (are not shown).
The heat-generator in the given picking it can be loaded by fuel as in manual (through a door), and in an automatic mode - from the bunker of fuel (7). Replenishment of the bunker of fuel is produced manually or system of automatic filling of the bunker of fuel (17). Optional the fuel bunker can replenish with an additional transporter from a warehouse of raw or a separate warehouse of fuel (are not shown).

 
 
Ελάχιστη Τιμή
407 000 euro
Βασική Τιμή
454 000 euro
Βέλτιστη Τιμή
474 500 euro
Μέγιστη Τιμή
490 500 euro
* Στην τιμή δεν περιλαμβάνεται Φ.Π.Α.
Τεχνικά Χαρακτηριστικά
Παράμετρος Τιμή Παραμέτρου
Γενικές διαστάσεις  
Μήκος, m 36,5
Πλάτος, m 20,5
Ύψος, m 8,7
Ηλεκτρική ισχύς  
Ηλεκτρική ισχύς, kW 230
Διαστάσεις στεγασμένου εξοπλισμού  
Μήκος, m 28,5
Πλάτος, m 15,0
Ύψος, m 6,0
Βάρος  
Βάρος, kg 27 965
ΕΡΓΑ  : Εργοστάσιο παραγωγής βιοκαυσίμων μπρικετών - 1 ... 1,5 t/h
Τηλέφωνο Επικοινωνίας
Πνευματική Ιδιοκτησία 2011-Όλα τα δικαιώματα διατηρούνται