Cooler of pellets, 15 t/hour
Cooling unit granules louver, in the complexes of equipment for biomass processing (production of fuel pellets, pelleted feed and granular organic fertilizer) is designed to cool the pellets, coming out of the press. During cooling, moisture granules (pellets) is reduced at the expense of evaporation water, and in them occur physical and chemical changes. As a result, the granules acquire necessary hardness, humidity and temperature.
The cooler - consists of a cooling chamber, head and devices unloading pellets. Own frame and actuator, cooler has no and installed directly on sorting pellets.
Hot pellets transported Noria from under Pellet press, arrive through rotary valve in the cooling chamber. Cooling granules is carried out passing through a layer of granules a the air, coming from below through the pipe unloading funnel and through the gaps between is unloaded the elements. At any point in the layer of granules temperature difference between the granules and the air is minimal, which prevents of temperature a shock, allows uniform cooling granules which minimizes their destruction (marriage). Filling the cooling chamber is regulated sensor level. When triggered the upper sensor, mechanism offload - enabled, triggered the lower sensor - off. Device unloading is unique, it is designed in such a way that when his work is not happening destruction of pellets due to their wedge between the edges of the moving parts of the mechanism of unloading. To prevent locking product of boot floodgates - on cooling chamber can be set emergency sensor level (optional). When triggered, given the sensor stops filing the pellets. For visual observation of over filled the cooling chamber a made granules, on its lateral anterior wall mounted sight glass. The window can be equipped a limit switch (optional), that warns opening the window when working cooler and prohibits its inclusion with open window. Of the cooling chamber through the device unloading pellets fed to the sorting (a separate product), which separates conforming standards granules from crumbs. Unloading Devices may be capable of smoothly adjust the speed output of products that provides maximum efficiency work the cooling granules. The cooler is connected to the ventilation unit, with an air flow of at least 1,000 m3/hour on each tonne of finished products.
Options:
1. Changes the position of level sensors.
2. Воздуховоды для подачи наружного холодного воздуха (для предотвращения удаления горячего воздуха из помещения, где стоит кулер гранул).
3. Sensor overflow cooling chamber.
4. Limit switch open door.
5. Control cabinet with frequency-variable speed unloading pellets.
Advantages of counterflow chiller-pellet production of «SP-Co»:
1. The possibility connectivity of cooling air from the outside.
2. High energy efficiency by using a unique patented discharging system, in which absent back-and-forth motion. Minimal destroy of granules at discharging for the same reason.
3. Is infinitely variable speed unloading pellets.
4. The possibility of continuous unloading of granules, synchronized with performance a pelletizer.
5. Rubber blades loading rotary valve - minimal damage fragile hot granules and minimum probability of jamming gateway.
6. Mechanical rotary level sensors (made in Germany), with no false positives, as opposed to any other sensors.
The design of the cooler granules (counterflow) is protected by the patent of the Russian Federation № 63914.
Minimum price
39 500 euro
All production of “SPiKo” – from separate element up to complex ready-to-operate factories (including services of projecting, assembling, testing and start-up) – can be bought on lease.
What are the advantages of lease? It provides the enterprise with additional opportunities of access to modern and efficient technologies, increase in volumes and profitability of production, increase in quality of the production. That is why today lease in one of the most popular financial instrument for creation of new productions and modernization of the existing ones.
Comparing to other methods of buying equipment at the expense of attracted finance leasing possesses several big advantages and only few disadvantages.
Advantages of leasing
1. Opportunity to receive financing in the volume increasing value of a business because mortgaging security in leasing transactions is the object of leasing itself.
2. Buying equipment on lease does not change balance of own and borrowed finance that lets the enterprise receive bank credits at the same time with buying equipment on lease.
3. Buying equipment on lease let the enterprise cut expenses for taxation because:
3.1 Leasing payments in full volume are to be counted together with production prime cost thus they reduce taxable base and as a result reduce tax on profit.
3.2 VAD taken from leasing payments can be reckoned.
3.3 Due to buying equipment on lease its depreciation is considered accelerated thus tax on property is significantly decreased. In case if during the time of leasing contract the equipment is shown at the balance sheet of the Lessor, the Lessee has not to pay tax on property for the property bought in this period in accordance with this contract.
Disadvantages of leasing:
1. Necessity of advanced payment (20 or 30% dependent on the cost of equipment)
2. Necessity (as in our case) to sign trilateral contract that needs much more time to be adopted by all parties than bilateral one.
It is evident that these disadvantages do not overlap the advantages of leasing.
Main terminology:
Leasing (or financial rent) – it is long term rent of equipment with following buying-out (right to buy-out) by the lessee.
Object of leasing – in our case – separate elements or complex factories for producing wood pellets, briquettes, wood flour, granulated meal, wood particles etc.
Leasing contract – is the contract in accordance with which the Lessor (the Buyer) is obliged to buy the equipment specified by the Lessee from special Seller (in this case from “SPiKo, Ltd.”) or our official representative and provide due payment for timely possession of equipment with its following buying-out.
Main types of buying equipment on lease:
1. To present a number of documents for us to be sure in your financial opportunities.
2. To receive adoption of leasing company
3. To sign the leasing contract (and relevant documents if necessary)
4. Lessee has to pay in advance to the Lessor.
5. The Lessor has to pay for the equipment to the Seller.
6. To produce the equipment and transfer it to the Lessee.
7. The Lessee has to make leasing payments in favor of the Lessor.
8. To transfer the equipment to the property of the Lessee.
Main terms of receiving a lease:
1. The Lessee has to posses sufficient volume of profit necessary to supply leasing payments or to have a guarantee of an enterprise satisfying this demand.
2. Equipment bought on lease has to be highly liquid. It can be equipment with good recommendations produced by a trustworthy producer and possessing all necessary certificates. Our equipment satisfies these demands and this let us to sell already 3 factories on lease (including foreign buyers).
3. The Lessor has to be the resident of the same country as the Lessee.
Our assistance in receiving the lease:
1. Recommendations of leasing companies that cooperate actively with our company.
2. Decrease of advance payment received by our company from the leasing company.
3. Providing of services on pre-project preparation of created production and its start-up that decreases the risks both of the Lessor and the Lessee.
* price without VAT
| PARAMETR NAME |
VALUE |
| The general dimensions |
|
| Length, m |
3,45 |
| Width, m |
2,30 |
| Height, m |
5,10 |
| Weight |
|
| Weight, kg |
3 119 |
|
