Solid fuel heat-generator 1,2 MW with giving system, any fuel
The heat generator solid fuel (in one hull with a the mixer air) using a large-caucus of fuel (wood, Kingfish, bark, logs, etc.) and fine-fractional fuel (sawdust, chippings, husk, straw, etc.) The appointment of the thermal generator - preparation of the heat-carrier for the process of drying of biomass (plant raw materials) at the expense of highly efficient combustion of low-grade solid fuels.
Constructively TGS presented is a double-walled steel cylinder. The inner cylinder possess is in its surface the holes for the air supply and he lining high-temperature chamotte brickwork, part of which has the holes for the air made of materials, maintaining temperatures 1650 degree centigrade. Blowing air is blown by fans in the cavity between the cylinders, where he heating air at the same time cooling the inner cylinder, and then over the holes for the air gets in a zone of pyrolysis or afterburning. Since holes for the air are arranged tangentially, and in the zone of pyrolysis, and in the zone of afterburning - the flow of air creates a vortex, compelling particles fuel move along the maximum length of the trajectory and cuddle up to the hot surface of the lining that is their complete the burning. Blowing air for ignition on as well the give tangentially and own heated. TG is made as in the horizontal (most often)as well as in vertical design (rarely), depending on the parameters of the building, which is set by the complex for production of pellets (briquettes) or other equipment.
As a fuel in the solid-fuel heat generators for achievement of maximum efficiency work of used pre-prepared fuel: dry wood logs, wood waste (wood chips, sawdust, etc.) and the waste of the production of pellets and briquettes.
The heat-generators solid fuel of production of LLC «SP-Co» created as a result of long studies in the field of combustion of solid fuels, a large experience of practical application of heat-generators solid fuel in complexes of the equipment for the production of fuel pellets and briquettes.
His construction is created in strict accordance with the latest scientific findings and contains a number of innovative technical solutions (not having analogues in the world), which provide fuel combustion in two phases:
1. Gasification at high temperatures and lack of oxygen.
2. Catalysers of pyrolysis gases with excess oxygen.
Two the process a flying in the vortex, and the ashes captured ash collector.
Due to the described properties of the heat generator production «SP-Co» has a consistently high efficiency and contributes to the greatest extraction of energy, contained in wood raw material, agricultural and other wastes.
Thanks to the calculated to the last detail design, the largest possible part of the heat is transferred directly heat carrier and the heat losses are reduced to a minimum.
The main technical characteristics of the heat-generator-mixer:
Nominal heat output at a relative humidity of fuel up to 30% - 1000 kW.
The efficiency of a heat generator - not less than 90% (when using fuel: wood waste, agricultural waste).
Standard configuration:
1. The furnace in the same housing with a mixer.
2. Bunker fuel with a mixer and auger feed.
3. The blowing fan (3 PCs.).
4. The extender racks (4 PCs.).
5. Control Cabinet (with two frequency regulators).
Advantages of heat-generators of production "SP&Co":
1) High efficiency at the expense of properly organized by the combustion process.
2) Minimum removal of ash and amount of ash in the processed product.
3) The minimum spark build-up, and, as a consequence, - a minimum fire hazard.
4) The high very durability of the lining due to the cylindrical shape and forced cooling.
The design of the heat-generator is protected by the patent of the Russian Federation № 82026.
Minimum price
59 500 euro
All production of “SPiKo” – from separate element up to complex ready-to-operate factories (including services of projecting, assembling, testing and start-up) – can be bought on lease.
What are the advantages of lease? It provides the enterprise with additional opportunities of access to modern and efficient technologies, increase in volumes and profitability of production, increase in quality of the production. That is why today lease in one of the most popular financial instrument for creation of new productions and modernization of the existing ones.
Comparing to other methods of buying equipment at the expense of attracted finance leasing possesses several big advantages and only few disadvantages.
Advantages of leasing
1. Opportunity to receive financing in the volume increasing value of a business because mortgaging security in leasing transactions is the object of leasing itself.
2. Buying equipment on lease does not change balance of own and borrowed finance that lets the enterprise receive bank credits at the same time with buying equipment on lease.
3. Buying equipment on lease let the enterprise cut expenses for taxation because:
3.1 Leasing payments in full volume are to be counted together with production prime cost thus they reduce taxable base and as a result reduce tax on profit.
3.2 VAD taken from leasing payments can be reckoned.
3.3 Due to buying equipment on lease its depreciation is considered accelerated thus tax on property is significantly decreased. In case if during the time of leasing contract the equipment is shown at the balance sheet of the Lessor, the Lessee has not to pay tax on property for the property bought in this period in accordance with this contract.
Disadvantages of leasing:
1. Necessity of advanced payment (20 or 30% dependent on the cost of equipment)
2. Necessity (as in our case) to sign trilateral contract that needs much more time to be adopted by all parties than bilateral one.
It is evident that these disadvantages do not overlap the advantages of leasing.
Main terminology:
Leasing (or financial rent) – it is long term rent of equipment with following buying-out (right to buy-out) by the lessee.
Object of leasing – in our case – separate elements or complex factories for producing wood pellets, briquettes, wood flour, granulated meal, wood particles etc.
Leasing contract – is the contract in accordance with which the Lessor (the Buyer) is obliged to buy the equipment specified by the Lessee from special Seller (in this case from “SPiKo, Ltd.”) or our official representative and provide due payment for timely possession of equipment with its following buying-out.
Main types of buying equipment on lease:
1. To present a number of documents for us to be sure in your financial opportunities.
2. To receive adoption of leasing company
3. To sign the leasing contract (and relevant documents if necessary)
4. Lessee has to pay in advance to the Lessor.
5. The Lessor has to pay for the equipment to the Seller.
6. To produce the equipment and transfer it to the Lessee.
7. The Lessee has to make leasing payments in favor of the Lessor.
8. To transfer the equipment to the property of the Lessee.
Main terms of receiving a lease:
1. The Lessee has to posses sufficient volume of profit necessary to supply leasing payments or to have a guarantee of an enterprise satisfying this demand.
2. Equipment bought on lease has to be highly liquid. It can be equipment with good recommendations produced by a trustworthy producer and possessing all necessary certificates. Our equipment satisfies these demands and this let us to sell already 3 factories on lease (including foreign buyers).
3. The Lessor has to be the resident of the same country as the Lessee.
Our assistance in receiving the lease:
1. Recommendations of leasing companies that cooperate actively with our company.
2. Decrease of advance payment received by our company from the leasing company.
3. Providing of services on pre-project preparation of created production and its start-up that decreases the risks both of the Lessor and the Lessee.
* price without VAT
| PARAMETR NAME |
VALUE |
| The general dimensions |
|
| Length, m |
5,82 |
| Width, m |
5,21 |
| Height, m |
3,22 |
| Weight |
|
| Weight, kg |
10 044 |
|
