Наш сайт использует cookie-файлы, данные об IP-адресе и вашем местоположении для того, чтобы сделать сайт максимально удобным для Вас. Если Вы продолжите пользоваться нашими услугами, мы будем считать, что Вы согласны с использованием cookie-файлов. Политика конфиденциальности

Contact number:

The consolidating screw conveyor

The consolidating screw conveyor

Conveyor screw consolidating is designed for transportation of raw material: wood chips, sawdust, peat, agricultural waste and other biomass in a horizontal direction from the parties to the center of the screw. At reprocessing plants biomass pellet production and (or) briquettes is usually used for transportation of dry milled material from the mechanized warehouse to the inclined conveyor and then - to the line of pressing.

Screw conveyor consists of a case, screw, bearing units and drive. The housing has the shape of a trench, open at the top. Inside the body of the bearing supports of set screw (screw), with a spiral direction from the edges to the center. When the rotation of the screw by means of a drive motor that is connected through a reduction gear, the material is captured by the blades of the propeller and moves around the body to the depositing the hole in the center. Screw made of solid steel strip rolled into a spiral on the special technology. To protect bearing units from the ingress of particles of the material, shaft screw has a special seals. For even greater reliability of bearing units can be mounted on the hull of a conveyor belt through a spacer sleeves prevent leakage of the transported material inside the bearings. Possible regulation of frequency of rotation of the screw, hence, the productivity of the auger. Capacity of the motor-reducer is chosen depending on the size of the screw, and the characteristics of transported material and performance requirements. On the case on all length there are ribs and a solid frame, to increase strength and to avoid deformation of the casing. The carrier is made for operation in the lower temperature of ambient air - minus 10 C, the high value - plus 40 degrees.

Advantages of screw conveyors of manufacture «SP-Co»:
1. The minimum friction and, therefore, energy consumption at the expense of use in the manufacture of screw solid (цельнотянутой) steel strip (high accuracy of geometrical sizes and the absence of joints between the screw, causing a lot of resistance of the material).
2. The simplicity of the design.
3. The ease of operation and maintenance.
4. Minimum dust.
5. Relatively low price.

Minimum price
14 750 euro
 
 
* price without VAT
PARAMETR NAME VALUE
The general dimensions  
Length, m 3,00
Width, m 0,30
Height, m 0,50
Weight  
Weight, kg 130
OUR PORTFOLIO  : The consolidating screw conveyor
Contact number
© 2011 All rights reserved.

Site development :
Slipchenko P.P.
АИР Coffeestudio