Наш сайт использует cookie-файлы, данные об IP-адресе и вашем местоположении для того, чтобы сделать сайт максимально удобным для Вас. Если Вы продолжите пользоваться нашими услугами, мы будем считать, что Вы согласны с использованием cookie-файлов. Политика конфиденциальности

Contact number:

The inclined belt conveyor for soft pellets

The inclined belt conveyor for soft pellets

Belt transporter (conveyor), in the steeply-sloped in composition plot of pressing intended for transportation of granules (pellets) from the horizontal transporter or press granulator towards the granules-cooler, as well as from sorting pellets towards hopper finished products. In fact, the steeply-sloped belt transporter is an alternative vertical transporter – Noria. In contrast to the noria - practically does not damage raw and the not durable pellets, but occupies a wider area of the room.
Conveyor drive - motor-reducer. Traction body - the tape of conveyor is reinforced polymer.
Corpus transporter is a welded metal construction consisting of the sections for the drive unit and tensioning. In the drive section is placed on the bearing supports the drive-shaft with the motor-reducer. In tensioning section - on similar of supports placed tensioning shaft with tensioning elements. The entire length of transporter, between the drive shaft and tensioning shaft, are located intermediate shafts. Intermediate shafts prevent sagging of the conveyor belt. With the end faces of the transporter the housing for protection of rotating mechanisms, and also to prevent the fall of the transported material, are installed the lateral cover. The rotation of the motor through a step-down gear motor is transmitted to the drive shaft. The drive shaft, rotates, sets in motion conveyer belt.

The conveyor is made for use in working order with lower ambient temperature of -10 ° C, and at the upper value plus 40 ° C. Installed electric electric motor power: 1.5 ... 3 kW.

Advantages of belt conveyors production of "SP-Co":
1. High precision geometric dimensions, at the expense of manufacturing the Frame of continuous steel shaped tube.
2. The special shape of shafts, preventing the "slip" tape.
3. The corrugated surface of the drive shaft, which prevents slippage tape.
4. The special design of tensioning the section, prevents the accumulation of in section transported product.

Minimum price
19 000 euro
 
 
* price without VAT
PARAMETR NAME VALUE
The general dimensions  
Length, m 4,60
Width, m 0,57
Height, m 0,35
Weight  
Weight, kg 250
OUR PORTFOLIO  
Contact number
© 2011 All rights reserved.

Site development :
Slipchenko P.P.
АИР Coffeestudio