The vertical belt conveyor for pellets 3 t/h
Noria (vertical conveyor) in composition plots for pressing (granulation) is designed for the transporting of hot granules into the cooler and for the transporting of cooled pellets from a sorting in the bunker finished products.
Noria - represent of yourself the car continuous the transporting with a flexible traction organ in the form strap (tape).
Loose product enters the elevator boot through the boot sock. The drive of rotate the drive drum, which, in turn, drives the tape fixed on it buckets. Going through around the drum-shoe, dipper loaded of material and climb towards the head of Noria, where the centrifugal force are unloaded into the nozzle unloading.
Drive shaft with impaled on shaft a drum, mounted on frictionless bearings and mounted with the corps a bearings on corps a head. Shoe noria - consists of a welded hull, the driven shaft, with impaled on shaft a drum, the receiver sock and two shutter. Corps shoe has a flange for accession of section. The receiver sock made in appearance a steel tray.
The output shaft, with the fitted him a drum, set on frictionless bearings, the corps which are attached to movable plate. Helical tension device serves to provide the necessary strip tension. Valves are used for cleaning the shoe noria. The drive Noria - gear motor. The section - is self-supporting construction and serve as a barrier for tape with ladles. For edit the tape, fastening and replacement of buckets used removable cover.
Standard equipment:
1. The shoe Noria with tensioning devices.
2. Section of the corps (the amount depends on the lifting height of the product, the usual length a section - 2 m).
3. Head Noria with the actuator.
4. The tape (usually made of reinforced rubber).
5. Ladles.
6. Metal-wares.
Options: explosive-discharge of sections, sensors coming off and slip tape, viewing window, tape of heat-resistant rubber.
Advantages of Noria production of "SP-Co":
Integer-formed a ladles - less susceptibility to corrosion, longer service life.
Compact, the minimum a height of the boot sock.
Rigid construction and high precision manufacturing Noria - not required special frame for her fixing (the installation).
Sealed construction, eliminates dust emissions.
The special design of the drums, prevents coming off tape.
The ease and convenience of service.
Minimum price
14 750 euro
All production of “SPiKo” – from separate element up to complex ready-to-operate factories (including services of projecting, assembling, testing and start-up) – can be bought on lease.
What are the advantages of lease? It provides the enterprise with additional opportunities of access to modern and efficient technologies, increase in volumes and profitability of production, increase in quality of the production. That is why today lease in one of the most popular financial instrument for creation of new productions and modernization of the existing ones.
Comparing to other methods of buying equipment at the expense of attracted finance leasing possesses several big advantages and only few disadvantages.
Advantages of leasing
1. Opportunity to receive financing in the volume increasing value of a business because mortgaging security in leasing transactions is the object of leasing itself.
2. Buying equipment on lease does not change balance of own and borrowed finance that lets the enterprise receive bank credits at the same time with buying equipment on lease.
3. Buying equipment on lease let the enterprise cut expenses for taxation because:
3.1 Leasing payments in full volume are to be counted together with production prime cost thus they reduce taxable base and as a result reduce tax on profit.
3.2 VAD taken from leasing payments can be reckoned.
3.3 Due to buying equipment on lease its depreciation is considered accelerated thus tax on property is significantly decreased. In case if during the time of leasing contract the equipment is shown at the balance sheet of the Lessor, the Lessee has not to pay tax on property for the property bought in this period in accordance with this contract.
Disadvantages of leasing:
1. Necessity of advanced payment (20 or 30% dependent on the cost of equipment)
2. Necessity (as in our case) to sign trilateral contract that needs much more time to be adopted by all parties than bilateral one.
It is evident that these disadvantages do not overlap the advantages of leasing.
Main terminology:
Leasing (or financial rent) – it is long term rent of equipment with following buying-out (right to buy-out) by the lessee.
Object of leasing – in our case – separate elements or complex factories for producing wood pellets, briquettes, wood flour, granulated meal, wood particles etc.
Leasing contract – is the contract in accordance with which the Lessor (the Buyer) is obliged to buy the equipment specified by the Lessee from special Seller (in this case from “SPiKo, Ltd.”) or our official representative and provide due payment for timely possession of equipment with its following buying-out.
Main types of buying equipment on lease:
1. To present a number of documents for us to be sure in your financial opportunities.
2. To receive adoption of leasing company
3. To sign the leasing contract (and relevant documents if necessary)
4. Lessee has to pay in advance to the Lessor.
5. The Lessor has to pay for the equipment to the Seller.
6. To produce the equipment and transfer it to the Lessee.
7. The Lessee has to make leasing payments in favor of the Lessor.
8. To transfer the equipment to the property of the Lessee.
Main terms of receiving a lease:
1. The Lessee has to posses sufficient volume of profit necessary to supply leasing payments or to have a guarantee of an enterprise satisfying this demand.
2. Equipment bought on lease has to be highly liquid. It can be equipment with good recommendations produced by a trustworthy producer and possessing all necessary certificates. Our equipment satisfies these demands and this let us to sell already 3 factories on lease (including foreign buyers).
3. The Lessor has to be the resident of the same country as the Lessee.
Our assistance in receiving the lease:
1. Recommendations of leasing companies that cooperate actively with our company.
2. Decrease of advance payment received by our company from the leasing company.
3. Providing of services on pre-project preparation of created production and its start-up that decreases the risks both of the Lessor and the Lessee.
* price without VAT
PARAMETR NAME |
VALUE |
The general dimensions |
|
Length, m |
0,66 |
Width, m |
0,79 |
Height, m |
5,84 |
Weight |
|
Weight, kg |
320 |
|