Complex of the equipment for manufacture of a wood flour 0,5 t/hour - "Maxi"
Set of equipment for production of wood flour with the capacity 0,5 t/h of wet shredded wood waste, sawdust, shavings, wood chips and unbusinesslike wood: balance sheets, slab, facing, etc. Power specified in the initial relative humidity of wood waste 50% and end - 5%. Final humidity and the degree of comminution is set by the operator from the control Unit of the speakers in the real-time mode.
A raw material is transported by motor vehicles (or loader) and pours out of the mechanized warehouse of “the moveable floor” (1). Stoker of “the mobile floor” have an hydraulic drive and under his influence commit reciprocating motion. The scapula (“wings”) of stoker have a wedge-shaped side, so when stoker is moving, a raw materials with adjustable feed speed is supplied on a chain (scraper) conveyer (2), then the raw material is fed to the disk separator (3). On it from raw material is separated stones, roots and the big particles, which are in a portable container (not shown on the scheme), and raw materials through the mercy of fate gets in the boot section of the Unit Drying and grinding (4). Here also supply the products of combustion of a heat generator (5) and ingest cold air through the emergency-ignition tube (6) (in the complete set is not included). Originally mixed combustion products and cold air mixing ratio is adjusted automatically, which ensures the maintenance of specified temperature of the heat-carrier. Then heat-transfer agent is mixed with wet raw materials and fed into the Unit Drying and grinding (4). In it the raw material is crushed and then dried, rising in the flow of coolant to the dynamic classification, which is in the head section of the Unit Drying and grinding. Dynamic classifier, the frequency of which is set from the control panel (12), allows fine and dry raw materials, and large and liquid particles of raw materials returns to the rotor of the Machine, the process is repeated to obtain the necessary humidity and the degree of grinding of raw materials. Crushed and dried raw materials (at this point it is called flour) goes into sedimentary cyclone (7) at the expense of rarefaction created by smoke exhauster (8). In the cyclone flour is deposited at the expense of centrifugal forces and moves downward, and the exhaust heat is emitted in the chimney (11) (in the complete set is not included). From the cyclone flour through a rotary shutter is served in the auger or chain conveyor (9), then goes into the bin (10), of which goes for further processing, for example - on the production of wood-plastic composites.
Minimum price
408 900 euro
All production of “SPiKo” – from separate element up to complex ready-to-operate factories (including services of projecting, assembling, testing and start-up) – can be bought on lease.
What are the advantages of lease? It provides the enterprise with additional opportunities of access to modern and efficient technologies, increase in volumes and profitability of production, increase in quality of the production. That is why today lease in one of the most popular financial instrument for creation of new productions and modernization of the existing ones.
Comparing to other methods of buying equipment at the expense of attracted finance leasing possesses several big advantages and only few disadvantages.
Advantages of leasing
1. Opportunity to receive financing in the volume increasing value of a business because mortgaging security in leasing transactions is the object of leasing itself.
2. Buying equipment on lease does not change balance of own and borrowed finance that lets the enterprise receive bank credits at the same time with buying equipment on lease.
3. Buying equipment on lease let the enterprise cut expenses for taxation because:
3.1 Leasing payments in full volume are to be counted together with production prime cost thus they reduce taxable base and as a result reduce tax on profit.
3.2 VAD taken from leasing payments can be reckoned.
3.3 Due to buying equipment on lease its depreciation is considered accelerated thus tax on property is significantly decreased. In case if during the time of leasing contract the equipment is shown at the balance sheet of the Lessor, the Lessee has not to pay tax on property for the property bought in this period in accordance with this contract.
Disadvantages of leasing:
1. Necessity of advanced payment (20 or 30% dependent on the cost of equipment)
2. Necessity (as in our case) to sign trilateral contract that needs much more time to be adopted by all parties than bilateral one.
It is evident that these disadvantages do not overlap the advantages of leasing.
Main terminology:
Leasing (or financial rent) – it is long term rent of equipment with following buying-out (right to buy-out) by the lessee.
Object of leasing – in our case – separate elements or complex factories for producing wood pellets, briquettes, wood flour, granulated meal, wood particles etc.
Leasing contract – is the contract in accordance with which the Lessor (the Buyer) is obliged to buy the equipment specified by the Lessee from special Seller (in this case from “SPiKo, Ltd.”) or our official representative and provide due payment for timely possession of equipment with its following buying-out.
Main types of buying equipment on lease:
1. To present a number of documents for us to be sure in your financial opportunities.
2. To receive adoption of leasing company
3. To sign the leasing contract (and relevant documents if necessary)
4. Lessee has to pay in advance to the Lessor.
5. The Lessor has to pay for the equipment to the Seller.
6. To produce the equipment and transfer it to the Lessee.
7. The Lessee has to make leasing payments in favor of the Lessor.
8. To transfer the equipment to the property of the Lessee.
Main terms of receiving a lease:
1. The Lessee has to posses sufficient volume of profit necessary to supply leasing payments or to have a guarantee of an enterprise satisfying this demand.
2. Equipment bought on lease has to be highly liquid. It can be equipment with good recommendations produced by a trustworthy producer and possessing all necessary certificates. Our equipment satisfies these demands and this let us to sell already 3 factories on lease (including foreign buyers).
3. The Lessor has to be the resident of the same country as the Lessee.
Our assistance in receiving the lease:
1. Recommendations of leasing companies that cooperate actively with our company.
2. Decrease of advance payment received by our company from the leasing company.
3. Providing of services on pre-project preparation of created production and its start-up that decreases the risks both of the Lessor and the Lessee.
* price without VAT
PARAMETR NAME |
VALUE |
The general dimensions |
|
Length, m |
30,0 |
Width, m |
20,5 |
Height, m |
8,7 |
Electric capacity |
|
Electric capacity, kW |
245 |
Dimensions indoors |
|
Length, m |
22,0 |
Width, m |
15,0 |
Height, m |
6,0 |
Weight |
|
Weight, kg |
25 275 |
|